A4 Mk2
Adjustment and marking of final drive gear set |
1 - | Identification “0937” denotes an Oerlikon gear set with a ratio of 37 : 9. |
2 - | -312- number of matched pair of gears |
3 - | Allowance “r” is based on the master gauge used on the test machine in production. The allowance “r” is always given in 1/100 mm. For example: “25” indicates r = 0.25 mm |
Ro - | Length of master gauge used on test machine in production. |
q | Crown wheel Ø 170 mm = 54.95 mm |
q | Crown wheel Ø 180 mm = 59.65 mm |
R - | Actual dimension between centre axis of crown wheel and face of pinion shaft at point with quietest running for this gear set. |
Vo - | Hypoid offset |