A4 Mk2
| Selector mechanism - exploded view of components |
| Part I |
Note| Lubricate all bearings and moving surfaces with polycarbamide grease -G 052 142 A2-. |
| 1 - | Ball |
| 2 - | Rubber ring |
| 3 - | Ball guide |
| 4 - | Rubber ring |
| 5 - | Washer |
| q | Lip points towards ball guide → Item |
| 6 - | Circlip |
| q | Take out before removing ball |
| 7 - | Spring |
| 8 - | Spacer sleeve |
| 9 - | Washer |
| 10 - | Circlip |
| 11 - | Noise insulation |
| q | -Arrow- marked on noise insulation points in direction of travel |
| 12 - | Gear lever knob |
| q | With boot |
| q | Removing and installing → Chapter |
| 13 - | Nut, 10 Nm |
| 14 - | Gear lever bearing |
| 15 - | Torx socket head bolt |
| 16 - | Gear lever |
| q | Bend points towards rear |
| 17 - | Bolt |
| 18 - | Nut, 10 Nm |
| 19 - | Selector housing |
| 20 - | Joint for gear lever/selector rod |
| 21 - | Nut, 10 Nm |
| q | Self-locking |
| q | Renew |
| 22 - | Bush |
| Part II |
Note| Lubricate all bearings and moving surfaces with polycarbamide grease -G 052 142 A2-. |
| 1 - | Ball socket |
| q | To remove, bend open peened points on selector rod → Item. |
| 2 - | Washer |
| 3 - | Ball socket |
| q | To remove pull off retaining clip → Item |
| 4 - | Bellows |
| q | Secure to selector rod with commercially available instant adhesive |
| 5 - | Selector shaft lever |
| 6 - | Nut, 23 Nm |
| 7 - | Bolt, 23 Nm |
| 8 - | Connecting rod |
| q | To remove pull off retaining clip → Item |
| 9 - | Retaining clip |
| 10 - | Bolt, 40 Nm |
| 11 - | Push rod |
| q | With bush, bolt and washers |
| 12 - | Hexagon socket head bolt, 23 Nm |
| 13 - | Washer |
| 14 - | Ball housing |
| 15 - | Clamping ring for bellows |
| 16 - | Bellows |
| q | To remove, carefully pull over selector rod → Item and push rod → Item. |
| q | When installing, align with markings on selector rod → Item and push rod → Item. |
| 17 - | Hexagon socket head bolt, 23 Nm |
| 18 - | Clamp |
| 19 - | Selector rod |
| 20 - | Selector fork |
| 21 - | Nut, 10 Nm |
| q | Self-locking |
| q | Renew |
| 22 - | Ball stud |
