A4 Mk2
| Pedal cluster (RHD vehicles) - exploded view |
| 1 - | Mounting bracket |
| q | Removing and installing → Chapter |
| 2 - | Washer |
| 3 - | Brake pedal |
| q | Maintenance-free bearing, do not grease |
| 4 - | Hexagon socket head bolt, 5 Nm |
| q | For securing the bearing sleeve |
| 5 - | Hexagon socket head bolt, 25 Nm |
| 6 - | Clutch pedal switch -F36- |
| q | Removing and installing → Chapter |
| q | Renew |
| q | Can only be installed once |
| 7 - | Bearing sleeve |
| q | Check for freedom of movement in clutch pedal |
| 8 - | Clutch pedal |
| q | Removing and installing → Chapter |
| 9 - | Retaining clip |
| q | Removing and installing → Item |
| 10 - | Hexagon socket head bolt, 20 Nm |
| 11 - | Clutch master cylinder |
| q | Removing and installing → Chapter |
| q | Seal -arrow- must not be removed |
| 12 - | Over-centre spring |
| q | Removing and installing → Chapter |
| q | For correct version, refer to → Electronic parts catalogue |
| 13 - | Bolt, 22 Nm |
| q | Self-locking |
| q | Renew |
| 14 - | Lever |
| q | Pin only fits in one position |
| 15 - | Washer |
| 16 - | Mounting |
| q | For over-centre spring |
| 17 - | Torx bolt, 25 Nm |
| q | For securing brake master cylinder/brake servo to mounting bracket |
| 18 - | Bolt, 25 Nm |