–
| Detach clutch slave cylinder from gearbox -arrow- and secure with wire; do not open pipe/hose system. |
Caution Do not depress clutch pedal after removing slave cylinder. The slave cylinder would then be destroyed once pedal force exceeds approx. 300 N. |
|
–
| If fitted, remove retaining clips/cable ties together with Lambda probe wires from top of gearbox. |
Note When lowering gearbox, make sure there is sufficient clearance from drive shafts. |
–
| Before carrying out assembly work, secure gearbox to assembly stand or engine and gearbox support -VAS 6095-, using engine and gearbox support -VW 540- → Chapter. |
|
|
|