audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing additional ATF filter on vehicles with 1.8 ltr. turbo engine, 2.0 ltr. TFSI engine and 4-cyl. TDI engine > < Cleaning ATF pipes and ATF cooler

A4 Mk2

Additional ATF filter
Additional ATF filter
  Note
t  Rules for cleanliness when working on the automatic gearbox → Chapter.
t  General repair instructions → Chapter.
t  Before fitting a replacement gearbox, always blow through the ATF cooler and ATF pipes with compressed air (not more than 10 bar) and replace the additional ATF filter. If the ATF which emerges during cleaning is very dirty, the pipes and ATF cooler must additionally be flushed out with clean ATF.
t  To install, first press ATF pipes onto gearbox or cooler by hand until they engage, then bolt on.
   

Removing and installing additional ATF filter on vehicles with 1.8 ltr. turbo engine, 2.0 ltr. TFSI engine and 4-cyl. TDI engine > < Cleaning ATF pipes and ATF cooler