A4 Mk2
| Servicing reverse gear clutch |
| 1 - | Corrugated washer |
| q | Replace in the event of problems with the reverse gear clutch or damage |
| 2 - | Lower shim |
| q | Determining thickness “E1” → Chapter |
| q | The thickness of the lower shim “E1” must be at least 2,15 mm |
| q | Replace in the event of problems with the reverse gear clutch or damage |
| 3 - | Friction plate |
| q | 6x |
| q | Replace in the event of problems with the reverse gear clutch or damage |
| 4 - | Outer plate |
| q | 5x |
| q | Replace in the event of problems with the reverse gear clutch or damage |
| 5 - | Upper shim |
| q | Determining thickness “E2” → Chapter |
| q | Replace in the event of problems with the reverse gear clutch or damage |