A4 Mk2
| Oil filter and oil cooler - exploded view of components |
| 1 - | Screw plug, 40 Nm |
| 2 - | Seal |
| q | Renew |
| 3 - | Spring |
| q | For pressure relief valve, approx. 4 bar |
| 4 - | Piston |
| q | For pressure relief valve, approx. 4 bar |
| 5 - | Screw plug, 15 Nm |
| q | Loosen with socket T70 -T10128- |
| 6 - | Seal |
| q | Renew |
| 7 - | Baffle plate |
| 8 - | Gasket |
| q | Renew |
| 9 - | Oil separator |
| q | For crankcase breather |
| 10 - | O-ring |
| q | Renew |
| 11 - | Retaining clip |
| 12 - | Seal |
| q | Renew |
| 13 - | Oil pressure switch -F1- |
| q | Opening/closing pressure 1.4 bar |
| q | Black insulation |
| q | Checking → Chapter |
| q | Tighten to 20 Nm |
| 14 - | Seal |
| q | Renew |
| 15 - | Seal |
| q | Renew |
| 16 - | 15 Nm |
| 17 - | Oil cooler |
| q | See note → Anchor |
| q | Removing and installing → Chapter |
| 18 - | Seal |
| q | Renew |
| 19 - | 15 Nm |
| 20 - | Oil filter - 20 Nm |
| q | Observe change intervals → Booklet803 |
| q | Observe installation instructions on oil filter |
| 21 - | Threaded connection |
| 22 - | Oil filter bracket |
| q | With pressure relief valve, approx. 4 bar |
| q | Removing and installing → Chapter |
