Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing oil filter housing >
< Oil filter and oil cooler - exploded view of components
A4 Mk2
Power unit
4-cylinder direct petrol injection engine (2.0 ltr. 4-valve), mechanics
Engine lubrication / Removing and installing parts of lubrication system
Removing and installing oil cooler
Removing and installing oil cooler
Removing and installing oil cooler
Removing
Caution
Observe notes on procedure for disconnecting the battery
→ Electrical system; Rep. Gr.27
.
–
Disconnect earth wire at battery with ignition switched off.
–
Drain off coolant
→ Chapter
.
–
Remove intake manifold
→ Rep. Gr.24
.
–
Remove coolant pipe (small)
→ Chapter
.
–
Unscrew the bolts
-arrows-
and remove oil cooler.
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew O-rings.
–
Install coolant pipe (small)
→ Chapter
.
–
Install intake manifold
→ Rep. Gr.24
.
–
Observe notes on procedures required after connecting battery
→ Electrical system; Rep. Gr.27
.
–
Fill cooling system
→ Anchor
.
Tightening torque
Component
Nm
Oil cooler to oil filter housing
15
Power unit
4-cylinder direct petrol injection engine (2.0 ltr. 4-valve), mechanics
Engine lubrication / Removing and installing parts of lubrication system
Removing and installing oil cooler
Removing and installing oil filter housing >
< Oil filter and oil cooler - exploded view of components