audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Toothed belt drive - exploded view > < Removing and installing poly V-belt

A4 Mk2

Removing and installing crankshaft pulley
Removing and installing crankshaft pulley
Removing
l  Lock carrier must be in service position → Chapter.
–  Remove poly V-belt → Chapter.
–  Unbolt pulley.
  Note
To loosen and tighten the crankshaft pulley, counterhold central bolt with a ring spanner.
Installing
Installation is carried out in the reverse order; note the following:
   
–  When fitting pulley, ensure that notches -arrows- are aligned with locating lugs on toothed belt sprocket.
–  Install poly V-belt → Anchor.
Tightening torque
  A13-0507
ComponentNm
Pulley to crankshaft22

   

Toothed belt drive - exploded view > < Removing and installing poly V-belt