audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing bottom section of intake manifold (left-side) > < Intake manifold - exploded view

A4 Mk2

Removing and installing intake manifold (top section)
Removing and installing intake manifold (top section)
Removing
  WARNING
t  Always read rules for cleanliness and instructions for working on fuel system → Chapter.
t  Follow these instructions and rules for cleanliness before starting work and while working on the fuel system.
–  Remove engine cover panel → Chapter.
–  Pull oil dipstick out of guide tube.
   
–  Loosen clamps -arrows-.
–  Swing toothed belt cover forwards.
  A13-10033
–  Unplug electrical connector -4-.
–  Disconnect air intake hose -5-.
–  Remove bolts -2- and -3-.
  Note
Disregard -item 1-.
  A15-10120
–  Remove bolts -arrows-.
–  Detach intake manifold (top section) together with intake connecting pipe and throttle valve module -J338-.
Installing
Installation is carried out in the reverse order; note the following:
  Note
t  Renew gaskets and seals.
t  Hose connections and hoses for charge air system must be free of oil and grease before assembly.
t  Secure all hose connections with the correct type of hose clips (same as original equipment) → Parts catalogue.
Tightening torques
  A23-10087
ComponentNm
Intake manifold (top section) to intake manifold (bottom section)9
Intake connecting pipe to intake manifold (top section)9
Intake connecting pipe to connecting pipe9
Hose clips (9 mm wide)3
Hose clips (13 mm wide)5.5

   

Removing and installing bottom section of intake manifold (left-side) > < Intake manifold - exploded view