audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for side lights > < Renewing gas discharge lamp

A4 Mk2

Renewing bulb for main beam headlights
Renewing bulb for main beam headlights
   
Removing
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge lamps → Electrical system; General information; Rep. Gr.94.
–  Remove headlight → Chapter.
–  Unscrew bolts -1- and -2-.
–  Release retaining clip -3- in direction of -arrow- and detach housing cover from headlight housing.
  A94-10102
–  Unplug electrical connector -1-.
–  Disengage wire clip -2- and remove bulb -3- from housing.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch the glass part of the bulb with bare hands.
–  Secure bulb with retaining clip.
–  Secure housing cover with bolts and retaining clip.
–  Install headlight → Anchor.
–  Connect the battery. Additional steps required → Anchor.
  A94-10127

Renewing bulb for side lights > < Renewing gas discharge lamp