audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for main beam headlights > < Adjusting headlights

A4 Mk2

Renewing gas discharge lamp
Renewing gas discharge lamp
   
Removing
  WARNING
High voltage! Danger to life! Observe environmental requirements.
Safety precautions when handling gas discharge lamps → Electrical system; General information; Rep. Gr.94.
–  Remove headlight → Chapter.
–  Unscrew bolts -1- and -2-.
–  Release retaining clip -3- in direction of -arrow- and detach housing cover from headlight housing.
  A94-10102
–  Unplug electrical connector -3-.
–  Release retaining clip -1- and take gas discharge lamp -2- out of housing.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new gas discharge lamp in housing; do not touch glass bulb with bare hands.
  Note
Heed installation position: lug at top of bulb holder must engage in recess of gas discharge lamp.
–  Secure gas discharge lamp with retaining clip.
–  Secure housing cover with bolts and retaining clip.
–  Install headlight → Anchor.
–  Connect the battery. Additional steps required → Anchor.
  A94-10133

Renewing bulb for main beam headlights > < Adjusting headlights