audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing 4-position relay carrier > < Removing and installing 9-position relay carrier

A4 Mk2

Removing and installing 3-position relay carrier
Removing and installing 3-position relay carrier
   
Removing
–  Switch off ignition and take out ignition key.
–  Remove driver's storage compartment → Rep. Gr.68.
–  Unscrew bolts -1- and detach 3-position relay carrier -2-.
  Note
Disregard -Item 3- and -Item 4-.
–  Unclip the fuse carriers at the 3-position relay carrier.
–  Detach relays and control units and then unclip appropriate relay carrier.
  Note
Exact assignment of 3-position relay carrier can be found in appropriate current flow diagram → Current flow diagrams, Electrical fault finding and Fitting locations.
Installing
Installation is carried out in the reverse order; note the following:
–  Install driver's storage compartment → Rep. Gr.68.
Tightening torque
  A70-0813
ComponentNm
3-position relay carrier to central tube for dash panel3

   

Removing and installing 4-position relay carrier > < Removing and installing 9-position relay carrier