Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing connector point (right-side) >
< Removing and installing connector point (left-side)
A4 Mk2
Vehicle electrics
Electrical system
Wiring / Relay carriers, fuse carriers
Removing and installing convenience system central control unit J393
Removing and installing convenience system central control unitJ393
Removing and installing convenience system central control unit -J393-
Removing
–
Remove A-pillar trim
→ Rep. Gr.70
.
–
Remove driver's seat
→ Rep. Gr.72
.
Note
Seat belt at seat frame does not have to be unfastened.
–
Fold back floor covering.
–
Release cover for electronics box (driver's side)
-arrows-
and fold cover towards right.
–
Release retaining clips
-arrows-
and remove convenience system central control unit -J393-
-item 1-
from electronics box.
–
Unplug connectors
-2 ... 6-
.
Note
Exact assignment of driver's side electronics box can be found in appropriate current flow diagram
→ Current flow diagrams, Electrical fault finding and Fitting locations
.
Installing
Installation is carried out in the reverse order; note the following:
–
Install A-pillar trim
→ Rep. Gr.70
.
–
Install driver's seat
→ Rep. Gr.72
.
Vehicle electrics
Electrical system
Wiring / Relay carriers, fuse carriers
Removing and installing convenience system central control unit J393
Removing and installing connector point (right-side) >
< Removing and installing connector point (left-side)