Caution | t
| When removing and installing belt guide, never turn bolts (screwed into belt guide from below). They have been set by the manufacturer. |
| t
| Renew entire belt guide if damaged. |
|
| –
| Remove luggage compartment side trim → Chapter. |
| –
| Take foam element out of recess beneath belt guide -1-. |
| –
| Insert screwdriver in recess below belt guide, press retaining hooks on belt guide upwards -arrow A- and hold. |
| –
| Slide belt guide to rear -arrow B- until bolt heads can be disengaged from bracket at body. |
| –
| Outer belt guide (rear): Unplug electrical connector for rear parking aid warning buzzer -H15-. |
| Installation is carried out in the reverse order; note the following: |
| –
| Place belt in recess in belt guide -1- and position belt guide on bracket. |
| –
| Insert belt guide with bolt heads in guide elements at bracket. |
| –
| Press belt guide downwards and at the same time pull it forwards, making bolt heads engage in guide elements. |
| –
| Pull belt guide forwards until retaining hook engages audibly. |
|
|
|
Note