audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view of impact dampers and brackets for glove box - equipment or country-specific version > < Removing and installing central tube for dash panel

A4 Mk3

Removing and installing mounting bracket
Removing and installing mounting bracket
   
Removing
–  Remove air duct for dash panel vent (left-side) → Rep. gr.87.
–  Unscrew bolts -1- and -3- and take out mounting bracket -2- downwards.
Installing
Installation is carried out in the reverse order; note the following:
–  Mounting bracket can only be positioned correctly if central tube is fitted.
–  First bolt steering column with mounting bracket to central tube and then tighten bolts -1- and -3- for mounting bracket to mounting on windscreen cross member.
Tightening torque → Chapter
  A70-10831

Exploded view of impact dampers and brackets for glove box - equipment or country-specific version > < Removing and installing central tube for dash panel