audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing fastening ring > < Exploded view of luggage compartment side trim
Removing and installing luggage compartment side trim
Removing and installing luggage compartment side trim
  Note
Removal and installation are identical on the left and right.
Special tools and workshop equipment required
   
t  Removal lever -80 - 200-
  W00-0353
Removing
–  Equipment version with side airbag (rear): Remove side airbag (rear) → Chapter.
–  Remove side padding → Chapter.
–  Equipment version with fixed rear seat backrest: Remove fixed rear seat backrest → Chapter.
–  Remove luggage compartment floor covering → Chapter.
–  Remove rear cross panel trim → Chapter.
–  Remove fastening ring → Chapter.
–  Remove fasteners -1- using removal lever -80 - 200-.
–  Lever luggage compartment side trim -2- off body -arrows- using removal lever -80 - 200-.
–  Disengage luggage compartment side trim at hinges and detach.
Installing
Installation is carried out in the reverse order; note the following:
  Note
t  If there are still trim clips in the body mounting points, they must be removed and inserted in the trim when installing.
t  Check the clips for damage or deformation and renew them if necessary.
–  Press on luggage compartment side trim until it engages audibly.
–  Fold lip of rear lid seal over luggage compartment side trim.
  A70-10863

Removing and installing fastening ring > < Exploded view of luggage compartment side trim