audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Vehicles with front-wheel drive > < Brake test
General notes
General notes
The wheels are driven by the brake test rollers.
During the test the gearbox must be in neutral on manual gearboxes or in position N on automatic gearboxes.
Follow the instructions provided by the manufacturer of the brake test equipment when performing the test.
  Note
Electronic brake control systems are inoperative when the ignition is switched off.
   
Please note the following if test and measuring equipment has to be used during a test drive:
  WARNING
There is a risk of accident if the driver's attention is distracted or if the test and measuring equipment is not adequately secured during the test drive.
There is a risk of injury if the passenger's airbag is triggered during an accident.
l  The operation of test and measuring equipment during a test drive distracts the driver's attention.
l  There is an increased risk of injury if test and measuring equipment is not secured.
t  Move the passenger's seat back as far as possible.
t  Use only vehicle diagnosis, testing and information system -VAS 5051- or vehicle diagnosis and service information system -VAS 5052- or diagnosis system -VAS 5053-.
t  The test and measuring equipment -1- must rest horizontally on the passenger's thighs as illustrated and must be operated by the passenger.
  A87-10409

Vehicles with front-wheel drive > < Brake test