audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing left mounting plate with control motors V108 and V110 > < Removing and installing left mounting plate with footwell flap control motorV261

A4 Mk3

Dismantling and assembling left mounting plate with footwell flap control motorV261
Dismantling and assembling left mounting plate with footwell flap control motor -V261-
–  Removing left mounting plate with footwell flap control motor -V261- → Chapter
  Note
t  The mounting plate with the footwell flap control motor -V261- is only fitted on vehicles with an air conditioner of the „Basic“ type.
t  At present all the control motors on this vehicle are identical. During basic setting, control motor assignment and adaption are implemented on the basis of the arrangement in the series connection of the wiring. If the sequence is not as specified, the matching of the control motors and thus flap control will not be correct → Chapter (block diagram of air conditioner control motors).
t  The shaft of the control motors has no stop. The shaft of these control motors can thus be inserted in any position in the cam plates.
t  Different versions of the levers and connecting elements are fitted at the air conditioning unit depending on the production period → Chapter and → Electronic parts catalogue.
   
1 - Bolt
2 - Footwell flap control motor -V261-
3 - Mounting plate
4 - Connecting rod
q   To the flaps for the left and right dash panel vents
5 - Actuating arm
6 - Cam plate
q   At footwell flap control motor -V261-
7 - Actuating arm
8 - Connecting rod
q   To the flaps for the rear footwell vent
9 - Connecting rod
q   To the flaps for the front footwell vent
10 - Stop for cam plate

   

Removing and installing left mounting plate with control motors V108 and V110 > < Removing and installing left mounting plate with footwell flap control motorV261