audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking concentricity of drive plate with overload safeguard/adjusting > < Removing and installing air conditioner compressor drive shaft

A4 Mk3

Detaching drive plate with overload safeguard/attaching
Detaching drive plate with overload safeguard/attaching
–  Remove the air conditioner compressor → Chapter (Removing and installing air conditioner compressor on vehicles with 8-cyl. FSI engine).
Detaching drive plate
   
–  Remove the bolts -A-.
  Note
Use a commercially available strap wrench (with fabric strap) to provide support at the drive plate -C-.
Attaching drive plate
–  Attach the drive plate with overload safeguard -B- to the drive plate -C-.
–  Insert and hand-tighten the bolts -A-.
–  Check the concentricity of the drive plate -B- → Chapter.
–  Tighten the bolts -A- (tightening torque 10 Nm).
–  Re-check the concentricity of the drive plate -B- → Chapter.
  A87-0623

Checking concentricity of drive plate with overload safeguard/adjusting > < Removing and installing air conditioner compressor drive shaft