A4 Mk3
| Transmission layout |
Note| -Arrows- point in direction of travel. |
| 1 - | Engine |
| 2 - | Drive plate |
| q | With needle bearing for gearbox input shaft |
| 3 - | Clutch module |
| q | Consists of pressure plate, clutch plate and dual-mass flywheel with flange for drive plate |
| 4 - | Front differential |
| 5 - | Input shaft (main shaft) |
| 6 - | Front pinion shaft (side shaft) |
| 7 - | Output shaft |
| 8 - | Manual gearbox |
| 9 - | Centre differential |
| 10 - | Propshaft |
| 11 - | Rear pinion shaft |
| 12 - | Rear differential |
| I - | 1st gear |
| II - | 2nd gear |
| III - | 3rd gear |
| IV - | 4th gear |
| V - | 5th gear |
| VI - | 6th gear |
| R - | Reverse gear |
| S - | Spur gears (intermediate drive) |
| q | With beveloid teeth |
| A1 - | Front final drive |
| A2 - | Rear final drive |