audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fans V7/V177 - version 1 > < Removing and installing radiator cowl - Audi A5

A4 Mk3

Removing and installing radiator fan control unitJ293
Removing and installing radiator fan control unit -J293-
Removing
  Note
Fit all cable ties in the original positions when installing.
–  Remove front noise insulation → Rep. gr.66.
   
–  Take electrical connector -1- for radiator fan out of bracket and unplug connector (push retainer to the rear -arrow- and press down release catch).
–  Move clear electrical wiring harness going to radiator fan control unit.
  A19-10591
–  Unplug electrical connectors -2- and -3-.
  Note
Some versions have only one radiator fan.
–  Unscrew bolt -arrow- and remove radiator fan control unit -1-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torques → Chapter „Radiator/radiator fans - exploded view“
–  Install front noise insulation → Rep. gr.66.
  A19-10626

Removing and installing radiator fans V7/V177 - version 1 > < Removing and installing radiator cowl - Audi A5