A4 Mk3
Exhaust gas temperature senders - exploded view |
1 - | Turbocharger |
2 - | Lambda probe -G39- with Lambda probe heater -Z19- |
q | Removing and installing → Rep. gr.23 |
3 - | Exhaust gas temperature sender 3 -G495- |
q | Removing and installing → Chapter |
q | The thread of the exhaust gas temperature sender is coated; it must not additionally be greased with high-temperature paste |
q | 60 Nm |
4 - | Exhaust gas pressure sensor 1 -G450- |
q | Removing and installing → Rep. gr.23 |
q | Pressure pipes to particulate filter: 45 Nm |
q | Coat thread with high-temperature paste; for high-temperature paste refer to → Electronic parts catalogue |
5 - | Exhaust gas temperature sender 4 -G648- |
q | Removing and installing → Chapter |
q | The thread of the exhaust gas temperature sender is coated; it must not additionally be greased with high-temperature paste |
q | 60 Nm |
6 - | Particulate filter |
7 - | Exhaust gas temperature sender 1 -G235- |
q | Removing and installing → Chapter |
q | Coat thread with high-temperature paste; for high-temperature paste refer to → Electronic parts catalogue |
q | 45 Nm |