audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fans V7 / V177 > < Removing and installing radiator cowl - Audi A5

A4 Mk3

Removing and installing radiator fan control unitJ293
Removing and installing radiator fan control unit -J293-
  Note
The following procedure refers to the radiator fan with separate radiator fan control unit -J293-.
   
Removing
–  Remove front noise insulation -1- → Rep. Gr.66.
  A10-11071
–  Take electrical connector -1- for radiator fan out of bracket and unplug connector (push retainer to the rear -arrow- and press down release catch).
–  Move electrical wiring harness going to radiator fan control unit clear.
  A19-10591
–  Unplug electrical connectors -2- and -3-.
–  Unscrew bolt -arrow- and remove radiator fan control unit -1-.
Installing
l  Tightening torque → Chapter.
Installation is carried out in the reverse order; note the following:
–  Install front noise insulation → Rep. Gr.66.
  A19-10626

Removing and installing radiator fans V7 / V177 > < Removing and installing radiator cowl - Audi A5