audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing valve for oil pressure controlN428 > < Removing and installing oil pressure switchF22

A4 Mk3

Removing and installing oil pressure switch for reduced oil pressureF378
Removing and installing oil pressure switch for reduced oil pressure -F378-
Special tools and workshop equipment required
   
t  Assembly tool -T10118-
  W00-1148
t  Articulated wrench, 24 mm -T40175-
  W00-10633
Removing
–  Lift off engine cover panel (rear) -2-.
  A10-11070
–  Take out noise insulation.
–  Use assembly tool -T10118- to unplug electrical connector -2-.
–  Use articulated wrench (24 mm) -T40175- to unscrew oil pressure switch for reduced oil pressure -F378--item 1-.
  Note
For illustration purposes, the installation position is shown with the supercharger removed.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Renew seal.
–  Tighten oil pressure switch for reduced oil pressure -F378- → Fig..
  A17-10431

Removing and installing valve for oil pressure controlN428 > < Removing and installing oil pressure switchF22