audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing display > < Connectors for display

A4 Mk3

Removing and installing radioR
Removing and installing radio -R-
–  When renewing control unit, select „Replacement“ function for appropriate control unit in „Guided Fault Finding“.
To do so, use → Vehicle diagnostic tester.
–  Switch off all electrical equipment.
–  Shift selector lever to „S“ position (automatic gearbox) or move gear lever all the way to the rear (manual gearbox).
–  Remove ignition key.
Removing
–  Remove air conditioner operating unit → Air conditioning system; Rep. gr.87.
–  Remove dash panel vents (centre) → General body repairs, interior; Rep. gr.70.
   
–  Remove bolts -arrows- at radio -R--1-.
–  Pull radio -R--1- out of dash panel.
–  Release and unplug connectors at radio -R-.
Installing
–  Install in reverse sequence of removal.
Tightening torques → Chapter
  A91-10992

Removing and installing display > < Connectors for display