audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Overview (up to week 44/08) > < General notes (up to week 44/08)
General notes (from week 45/08 onwards)
General notes (from week 45/08 onwards)
The telephone system consists of the following versions:
t  Mobile phone pre-installation (CAN)
The telephone transmitter and receiver unit -R36- is linked to the infotainment system (radio) via the CAN bus. It also has an aerial for Bluetooth -R152-.
The system is operated using the radio -R- or the mobile telephone -R54-.
Microphones for the microphone unit in front roof module -W1- are integrated in the front interior light -R164-. One of these microphones (front left microphone -R140-) is connected to the telephone transmitter and receiver unit -R36-.
t  Mobile phone pre-installation in control unit 1 for information electronics -J794- (MMI)
The mobile phone pre-installation does not have a separate control unit (telephone transmitter and receiver unit -R36-), but all functions are integrated in the control unit 1 for information electronics -J794-. The system is operated using the MMI infotainment system or the mobile telephone -R54-.
Microphones for the microphone unit in front roof module -W1- are integrated in the front interior light -R164-. One of these microphones is connected directly to the control unit 1 for information electronics -J794-.
t  Bluetooth hands-free system (CAN)
The telephone transmitter and receiver unit -R36- with microphone unit in front roof module -R164-/ aerial for Bluetooth -R152- is fitted and used as a hands-free system only. It is connected to the mobile telephone -R54- via Bluetooth.
The aerial for Bluetooth -R152- is attached to the telephone transmitter and receiver unit -R36-.
t  Bluetooth hands-free system in control unit 1 for information electronics -J794- (MMI)
The control unit 1 for information electronics -J794- with microphone unit in front roof module -R164- is fitted and used as a hands-free system only. It is connected to the mobile telephone -R54- via Bluetooth.
The aerial for Bluetooth -R152- is fitted in the control unit 1 for information electronics -J794-.
Fault finding is performed via the „Guided Fault Finding“ → Vehicle diagnostic tester.
Repairing aerial wiring → Electrical system; Rep. gr.97.
Notes on Bluetooth technology
A standardised radio connection system (Bluetooth technology) is used to transmit data between the control unit 1 for information electronics -J794- and the mobile telephone -R54-.
An additional transmitter and receiver unit is fitted in the control unit 1 for information electronics -J794-. A separate aerial for Bluetooth -R152- links the control unit 1 for information electronics -J794- and the mobile telephone -R54-.
The range of the radio wave connection is approx. 10 m.
For more information, refer to → No.286.
   

Overview (up to week 44/08) > < General notes (up to week 44/08)