audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Pin assignment at fuel gauge senderG > < Removing and installing instrument cluster with control unit in dash panel insertJ285

A4 Mk3

Pin assignment at multi-pin connector on instrument cluster
Pin assignment at multi-pin connector on instrument cluster
   
32-pin connector, grey
1 - Not used
2 - CAN bus (screening) wake-up wire
3 - CAN bus (Low) wake-up wire
4 - CAN bus (High) wake-up wire
5 - Sender earth for fuel gauge sender -G- - pin 2
6 - Fuel gauge sender -G- - pin 4
7 - Fuel gauge sender -G- - pin 3
8 - Switch panel
9 - Fuel gauge sender 2 -G169- - Pin 2
10 - Fuel gauge sender 2 -G169- - Pin 1
11 - Not used
12 - Not used
13 - Not used
14 - Not used
15 - Not used
16 - Not used
17 - Not used
18 - Not used
19 - Not used
20 - Check button
21 - Not used
22 - Not used
23 - Radio-controlled clock 5V
24 - Radio-controlled clock signal
25 - Oil level
26 - Not used
27 - Not used
28 - Not used
29 - Terminal 31
30 - Terminal 31
31 - Terminal 30
32 - Terminal 30
  A90-10088

Pin assignment at fuel gauge senderG > < Removing and installing instrument cluster with control unit in dash panel insertJ285