audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulbs for front interior light W1 > < Removing and installing contact switch for vanity mirror F147/F148

A4 Mk3

Removing and installing interior light/reading light (front)
Removing and installing interior light/reading light (front)
   
Removing
–  Switch off ignition and take out ignition key.
–  Open sunglasses compartment -2-.
–  Remove bolt -1-.
–  Pivot the interior light/reading light (front) -3- downwards and remove from roof trim.
–  Unplug electrical connectors.
Installing
l  Tightening torque → Fig.
Installation is carried out in the reverse order; note the following:
–  Fit interior light and secure.
  A96-10456

Renewing bulbs for front interior light W1 > < Removing and installing contact switch for vanity mirror F147/F148