audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Renewing reading light bulbs (front) W13/W19 > < Removing and installing interior light/reading light (front)
Renewing bulbs for front interior light W1
Renewing bulbs for front interior light -W1-
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
Removing
–  Apply tip of removal wedge -3409- to ribs on trim -1- for hands-free microphone.
l  The felt strip on the underside of the trim must not be damaged.
–  Carefully lever off trim -arrow-.
  A96-10470
–  Carefully slide tip of removal wedge -3409- under centre of lens -1-, disengage four retaining tabs and detach lens -arrows-.
  A96-10471
–  Take bulb -1- or -2- (12 V, 10 W) out of clamp-type bulb holder.
  A96-10472
–  Fit the four retaining tabs on lens -1- in light housing -arrows- and press down on rear edge until they engage.
Installing
Install in reverse order.
  A96-10473

Renewing reading light bulbs (front) W13/W19 > < Removing and installing interior light/reading light (front)