audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing front parking aid senders G252/G253/G254/G255 - allroad > < Removing and installing front parking aid senders G252/G253/G254/G255 - saloon and Avant up to model year 2012

A4 Mk3

Removing and installing front parking aid senders G252/G253/G254/G255 - saloon and Avant from model year 2013 onwards
Removing and installing front parking aid senders -G252-/-G253-/-G254-/-G255- - saloon and Avant from model year 2013 onwards
   
Removing
Outer senders:
–  Removing headlight housing: halogen headlights → Chapter, gas discharge headlights → Chapter.
–  Press the two retaining tabs apart -arrows- and at the same time press out sender -2- from outside to inside.
–  Unplug electrical connector -1- on sender.
  A94-10267
Inner senders:
–  Remove lock carrier cover → Rep. gr.63.
–  Reach through openings in radiator grille behind mountings and press the two retaining tabs apart -arrows-, at the same time press out sender -1- from outside to inside.
–  Unplug electrical connector -2- on sender.
Installing
Installation is carried out in the reverse order; note the following:
Outer senders:
–  Removing headlight housing: halogen headlights → Chapter, gas discharge headlights → Chapter.
Inner senders:
–  Install lock carrier cover → Rep. gr.63.
  A94-11333

Removing and installing front parking aid senders G252/G253/G254/G255 - allroad > < Removing and installing front parking aid senders G252/G253/G254/G255 - saloon and Avant up to model year 2012