audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing washer fluid reservoir > < Exploded view of washer fluid reservoir, washer fluid hoses, washer jets

A4 Mk3

Removing and installing filler neck for washer fluid reservoir
Removing and installing filler neck for washer fluid reservoir
   
Removing
Vehicles up to 05.2008:
–  Detach seal -arrow- in section of filler neck for washer fluid reservoir.
–  Unclip plenum chamber cover -3- and detach.
  Note
Disregard -items 1 and 2-.
  A92-10115
Vehicles from 06.2008 onwards:
–  Remove bolts -3-.
–  Unclip retaining clips -2- from retainer and detach plenum chamber cover -1-.
  A92-10166
All vehicles (continued):
–  Unscrew nut -1- and swivel filler neck for washer fluid reservoir slightly towards rear -arrow A-.
–  Detach filler neck -2- with filler pipe from washer fluid reservoir and remove through opening in body -arrow B-.
  A92-10091
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Slide sealing grommet -2- onto filler pipe for filler neck -1- as far as stop.
l  Lug must engage in recess in filler pipe -arrows-.
–  Insert filler neck in washer fluid reservoir.
  Note
Make sure that the O-ring in the washer fluid reservoir does not become pinched when inserting.
  A92-10078

Removing and installing washer fluid reservoir > < Exploded view of washer fluid reservoir, washer fluid hoses, washer jets