A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
In selection - 1 -, click on the diagnostic function " 08 - Read measured value block".
Display on (VAS 5051 A):
1
Enter display group
-
In button field - 2 -, enter "4" for " display group 4" and confirm the input by pressing the Q button.
Display on (VAS 5051 A):
-
Read off ATF temperature indicated in display field - 1 -.
ATF, Checking Level and Correcting
‹› The ATF level is checked at the ATF inspection plug.
‹› The ATF level is correct if a small amount of fluid drips out of the inspection hole (this is normal as the fluid expands as it heats up) at an ATF
temperature between 35 °C and 45 °C (for hot countries 50 °C).
-
To ensure vehicle is absolutely level, drive onto a 4-column lifting platform or over a service pit.
-
Fill the reservoir of the ATF filler tool (V.A.G 1924) with ATF for automatic transmission 09L; ATF specification. Refer to => [ Specifications ]
See: Specifications
CAUTION!
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF oils!
-
Secure reservoir of ATF filling system (V.A.G 1924) as high as possible on vehicle.