A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Remove bolts - 1 - and - 2 - and lower subframe toward the rear.
-
Remove left transmission support. Refer to => [ Left and Right Transmission Mount and Transmission Support ] See: Transmission Mount/Service
and Repair.
-
Press selector lever cable ball joint - 1 - off from selector shaft lever.
-
Remove mounting bracket on the transmission - arrows -.
‹› Take care not to bend or kink selector lever cable.
-
Remove heat shield under the selector mechanism, if equipped.
-
Remove selector lever cable retaining clip - 1 - sideways.