A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Remove mounting bolts for intermediate bearing - B -. When doing this, support driveshaft by hand.
-
Remove heat shield while supporting driveshaft.
-
Install mounting bolts for intermediate bearing by hand.
Audi A6:
-
If present, remove rear transverse beam - 1 -.
-
Remove heat shield - 3 - from vehicle floor - arrows -.
Continuation for all vehicles:
-
If present, remove mounting bolts for front exhaust pipes - 1 - and - 2 -.