A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Fill area between sealing lip and dust lip halfway with Sealing Grease (G 052 128 A1).
-
Lightly oil outer circumference of seal.
-
Install the sealing ring - arrow - into the housing up to the stop.
The rest of the installation follows the reverse order of removal, note the following:
Vehicles with 6-cylinder gasoline engine:
-
Reconnect exhaust system and ensure it is not under stress.
-
Install the left drive axle heat shield.
All Vehicles