A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Oil Pan: Service and Repair
Oil Pan, Oil Pump and Oil Cooler Component Overview
Oil Pan, Oil Pump and Oil Cooler Component Overview
‹› If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully
cleaned to prevent resulting damage and the oil cooler must be replaced.
‹› The oil level must not be above the max. mark - danger of damage to catalytic converter!
‹› Oil injector jet for piston cooling => [ Oil spray jet for piston cooling ]
1
9 Nm
‹› Depending on the version, bolt or nut
‹› Insert with locking compound; Locking compound.
2
Oil Level Thermal Sensor (G266)
3
Oil drain plug - 30 Nm
4
9 Nm
5
Lower oil baffle
6
16 Nm
‹› Fasten in diagonal sequence in steps