A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
7
Oil pan (upper section)
‹› Removing and installing, refer to => [ Oil Pan Upper Section ] See: Oil Pan Upper Section
8
O-ring
‹› Replace
9
9 Nm
‹› Insert with locking compound; Locking compound.
10
Upper oil baffle
11
Gasket
‹› Replace
12
Gasket
‹› Replace
13
9 Nm
14
Oil cooler
‹› Removing and installing, refer to => [ Oil Cooler ] See: Oil Cooler/Service and Repair/Oil Cooler
‹› With oil cooler by-pass valve
15
9 Nm
16
Drive shaft for oil pump
17
Spring
18
Bracket
19
9 Nm
20
Chain sprocket for oil pump
‹› Can only be placed onto drive shaft in one position
21
30 Nm plus an additional 90° (1/4 turn)
‹› Replace
‹› To loosen, counterhold on sprocket with Spanner Wrench (3212)
22
O-ring
‹› Replace
23
O-rings
‹› Replace
24
20 Nm
25
Oil pump
‹› Do not disassemble
‹› With cold pressure relief valve 11 bar and pressure regulator valve 4.3 bar