A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› The groove of the sealing surfaces must be completely filled with sealant.
‹› The sealant bead must be 1.5 to 2.0 mm above the sealing surface.
‹› Sealant bead must not be thicker than specified, otherwise sealant could get into oil pan and clog the oil pump strainer.
‹› The oil pan (upper section) must be installed within 5 minutes after application of sealant.
-
Insert seal - 1 - and O-ring - 2 - in guide frame.
-
Position upper part of oil pan in place and tighten bolts - 1 through 6 - to 5 Nm in diagonal sequence.