A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Wiring Harness: Removal and Replacement
Wire, 0.35 mm and Larger With Individual Crimp Connector, Repairing
Wiring Harnesses and Connectors
Special tools, testers and auxiliary items required
‹› Wiring Harness Repair Kit (VAS 1978) with
‹› Upgrade kit (VAS 1978/50)
‹› or Wiring Harness Repair Set (VAS 1978A)
‹› The Upgrade Kit (VAS 1978/50) is required to bring the "old" Wiring Harness Repair Kit ( VAS 1978) up to the new standard of the Wiring
Harness Repair Set (VAS 1978A).
CAUTION!
‹› Wiring harness and socket repairs may only be carried out with the Wiring Harness Repair Kit (VAS 1978) or Wiring Harness
Repair Set (VAS 1978A).
‹› Observe the country-specific requirements.
‹› Usage of the Wiring Harness Repair Kit (VAS 1978 ) or Wiring Harness Repair Set (VAS 1978A) is described extensively in the accompanying
usage instructions.
‹› Repairs on open circuits and faulty connectors are also explained using examples.
Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
Procedure
-
Free up the wire to be repaired approximately 20 cm on both sides of the repair point.
CAUTION!
Risk of damaging the electrical wires.
‹› Free up wrapped wiring harnesses carefully.
-
If necessary, removing the wiring harness wrapping using a knife.
-
Cut out the damaged wire section using wire stripper (VAS 1978/3).