A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-2028002.png)
-
Loosen bolts/quick release fasteners - 1 - and - 2 - and remove front sound insulation - A -.
-
If installed, loosen quick release fasteners - 3 - and remove rear sound insulation - B -.
-
If installed, remove sound insulation - arrows - in wheel housing (right-side).
-
Remove heat shield - arrows - for drive axle (right-side).
-
Remove drive axle (right-side).
-
Place drip tray VAG1306 underneath.
-
Remove flange shaft (right-side); by securing puller T10037 to transmission housing arrow