A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-2043007.png)
-
Attach the push rod - 1 -. Tightening specification => [ (Item 13) Bolt, 40 Nm ] See: Service and Repair/Removal and Replacement/02XA
Transmission/Selector Mechanism Assembly Overview.
-
Tighten the connecting rod - 2 -. Tightening specification => [ (Item 10) Bolt, 20 Nm ] See: Service and Repair/Removal and Replacement/02XA
Transmission/Selector Mechanism Assembly Overview.
-
Tighten the selector housing - arrows -. Tightening specification => [ (Item 18) Nut, 10 Nm ] See: Service and Repair/Removal and
Replacement/02XA Transmission/Selector Mechanism Assembly Overview.
-
Tighten the driveshaft on the transmission.
-
Install the exhaust system and align it free-of-tension.