A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
First insert predetermined shim S3 for pinion shaft.
Note:
The marking "Oben " on 325314 thrust piece faces the nut of the puller
Fig. 9 Installing small tapered roller bearing outer race
-
Oil outer race, and position using VW408A punch and 30-205 thrust pad.
Fig. 10 Installing small tapered roller bearing inner race
WARNING!
Wear protective gloves.
-
Insert pinion shaft with new spacer sleeve.
-
Heat small tapered roller bearing inner race to approx. 100°C (212°F) and install onto pinion shaft.
-
Lift up pinion shaft and press bearing using 40-21 sleeve up to stop.
Fig. 11 Tightening nut for pinion shaft and measuring friction torque