A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-1472002.png)
-
Fuel Pump (FP) Control Module J538 OK; check. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Fuel Pump Control
Unit/Testing and Inspection
-
Fuel tank at least 1 / 4 filled.
-
Ignition switched off.
Test sequence
-
Remove rear seat bench.
-
Unbolt cover for left locking flange - arrows - .
-
Disconnect electrical harness connector - arrow - at right locking flange.
-
Connect remote control V.A.G 1348/3 A with connection V.A.G 1348/3-3 to contact - 1 - using an adapter cable from connector test set V.A.G
1594 C .
-
Using insulating tape, tape over the second contact of connection V.A.G 1348/3-3 to prevent a short circuit - arrow - .
