A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Drive Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
Special tools, testers and auxiliary items required
Drift T40098
Removing
Note: Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning of direction can cause damage to
the belt under operating conditions.
-
Mark direction of rotation of ribbed belt.
-
Pivot belt tensioner for ribbed belt in direction of - arrow - to relieve tension on ribbed belt.
-
Secure tensioning element using drift T40098.
-
Remove ribbed belt.
Installing
Note: Ribbed belt routing.
-
Hold tensioning element with a box-end wrench, remove drift T10060 A or T10060 and relieve tension on the tensioning element.
-
Check ribbed belt for correct positioning.
-
Start engine and check belt running.