A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1473007.png)
-
Connect electrical connector to the gas pedal module.
Clip brake pedal to the brake booster.
-
Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.
CAUTION!
The brake pedal stop must always be installed otherwise the brake lamp sensor mount could break when the brake pedal is unlocked
-
Install brake lamp sensor => [ Brake Lamp Sensor ] See: Power Brake Assist/Brake Intervention Sensor / Switch/Service and Repair.
-
Push steering column - 1 - on steering shaft - 3 -.
