A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1548002.png)
-
Remove fuel high pressure pump - 2
-
Loosen ignition coil strip on the bracket.
-
Disconnect ignition coil connectors - arrow -.
-
Carefully push ignition coil strip to side.
-
Disconnect wires on high pressure pump and on the vacuum pump and push them to the side.
-
Disconnect vacuum hose at the hose clamp to the vacuum pump.
CAUTION!
Do not damage the vacuum hose. Replace the vacuum hose if damaged.
-
Remove all the bolts on the vacuum pump sealing flange - arrows -.
