A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-2267002.png)
CAUTION!
Do not grasp fan wheel of Fresh Air Blower (V2), force against the fan wheel or shifting the balancing weights fastened to fan wheel may
cause imbalance and then problems during operation.
Installing
Installation is carried out in the reverse order, when doing this note the following.
-
If the locking mechanism - A - breaks or can no longer hold, you can secure Fresh Air Blower (V2)- B - to the air intake housing using a screw -
C -.
-
When installing, make sure the Fresh Air Blower ( V2)- B - fits correctly in the air intake housing.
-
Check DTC memory of A/C control head Climatronic Control Module (J255) and erase any displayed malfunction if necessary. Refer to Vehicle
Diagnosis, Testing and Information System VAS 5051 in "Guided Fault Finding" function.
-
To check the function, perform an output Diagnostic Test Mode (DTM) on the A/C system. Refer to Vehicle Diagnosis, Testing and Information
System VAS 5051 in "Guided Fault Finding" function
