A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-3479002.png)
-
Install union nut - 1 - on tire pressure sensor - 2 -. When doing this, press the sensor into the bed and hold it there.
CAUTION!
‹› When tightening the union nut, avoid excessive pressure on the nut and on the tool
-
Press tire pressure sensor- 1 - onto rim well and tighten union nut. Refer to => [ Tire Pressure Monitoring Sensor Assembly Overview ] See:
Service and Repair/Removal and Replacement/Tire Pressure Monitoring Sensor Assembly Overview.
‹› After installing, tire pressure sensor must lie firmly in its bed.
‹› Sealing washer - arrow - becomes slightly deformed when doing this.
