A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
![background image](/audi/a4_quattro_wagon/l4-2.0l_turbo_(caeb)/Page-1372003.png)
-
Before installing joint piece, splines - A - must be lightly coated with grease used in joint.
-
Press on joint until stop.
Chamfer on inner diameter of ball hub (splines) must face the contact shoulder on the drive axle.
Use special tool shown in illustration.
You can also use the (T10065) instead of the (40-204 A).
(40-204 A) or (T10065) and clamping surfaces on drive axle must be free of grease.
Circlip must be replaced.
-
Install circlip.